FIBARO Z-Wave Smoke Sensor

Fibaro

$139.00

This product is currently sold out

  • FIBARO Z-Wave Smoke Sensor
  • FIBARO Z-Wave Smoke Sensor

The Fibaro Smoke Sensor is a universal, optical Z-Wave smoke sensor. The device can be hard wired (12 or 24 VDC) or battery operated (battery life 3 years*). Smoke detection is signaled through siren and LED diode blinking. Additionally, the smoke sensor signal can be sent to an alarm system or fire alarm system hub, through a NC (normally closed) contact terminals. The optical sensor detects smoke at an early stage of fire, often before flames appear and temperature starts to rise significantly. Moreover the device has a built-in temperature sensor, which can also trigger the alarm once the specified temperatute threshold is exceeded. The Fibaro Smoke Sensor is designed to be placed on a wall or ceiling. LED indicator signals fire, operating mode and used to see if device is within the Z-Wave network. The smoke sensor is designed to operate in confined spaces, under normal conditions (lacking smoke, dust, condensed water vapor).

* Depending on the parameters settings.

 

Product Details

• Compatible with any Z-Wave Controller.
• May be connected to any alarm or fire prevention system by hard wiring NC output
• Extremely easy installation - simply install it in location prone to fire.
• Battery or VDC powered.
• Built-in tamper switch.
• Alarm is signaled by sound and LED diode.
• Fire detection through air temperature measuring.
• Can trigger alarm just by exceeding temperature threshold.
• 3 levels of sensors sensitivity.
• Automatic efficiency test performed every 5 seconds.
• Built-in “black box” allows the device to report and record smoke and temperature readouts.
Product Support

Manuals:

OPERATING MANUAL

Videos / YouTube:Smoke Sensor

 

Technical Specifications

Product Name 
SMOKE SENSOR FGSS-001 v2.3
Battery Type
CR123A battery, 3.6 VDC
Operation Range
30m
 
 
Radio frequency
921.42 MHz (AU/NZ Z-Wave)
Power Consumption
0,4W
Operation temperature
0 - 50C*
Measured temperature range 0,5o C (within 0o C - 40o C range)
Temperature measuring accuracy
0,5 C
Housing
ABS
Size (Diameter)
65 x 28 mm

Share this

Similar Products